BCO-DMO ERDDAP
Accessing BCO-DMO data |
log in
Brought to you by BCO-DMO |
Row Type | Variable Name | Attribute Name | Data Type | Value |
---|---|---|---|---|
attribute | NC_GLOBAL | access_formats | String | .htmlTable,.csv,.json,.mat,.nc,.tsv |
attribute | NC_GLOBAL | acquisition_description | String | Seawater was transferred to 20 L carboys that were rinsed three times with\nwater from the sampling depth and then filled with seawater from a single\nNiskin bottle, using silicone tubing that had been acid washed then rinsed\nwith distilled water prior to use. From each carboy, water was dispensed into\nsmaller glass containers that were cleaned and pre-rinsed three times with\nwater from the carboy prior to dispensing. This water was used to measure cell\ncounts, bacterial productivity, and the activities of polysaccharide\nhydrolases, peptidases, and glucosidases. A separate glass Duran bottle was\nfilled with seawater from the carboy and sterilized in an autoclave for 20-30\nminutes to serve as a killed control for microbial activity measurements.\n \nThe potential of the seawater microbial community to hydrolyze six high-\nmolecular-weight polysaccharides (arabinogalactan, chondroitin sulfate,\nfucoidan, laminarin, pullulan, and xylan) was investigated in surface and\nbottom water. For each substrate, three 50 mL falcon tubes were filled with\nseawater and one 50 mL falcon tube was filled with autoclaved seawater to\nserve as a killed control. Substrate was added at 3.5 \\u03bcM monomer-\nequivalent concentrations, except for fucoidan, which was added at 5 \\u03bcM\nconcentrations (a higher concentration was necessary for sufficient\nfluorescence signal). Two 50 mL falcon tubes \\u2013 one with seawater and one\nwith autoclaved seawater \\u2013 with no added substrate served as blank\ncontrols. Incubations were stored in the dark at as close to in situ\ntemperature as possible. Subsamples of the incubations were collected at time\nzero, and at a sequence of subsequent time points. At each time point, 2 mL of\nseawater was collected from the 50 mL falcon tube using a sterile syringe,\nfiltered through a 0.2 \\u03bcm pore size syringe filter, and stored frozen\nuntil processing.\n \nThe hydrolysis of high molecular weight substrate to lower molecular weight\nhydrolysis products was measured using gel permeation chromatography with\nfluorescence detection, after the method of Arnosti [1996, 2003]. In short,\nthe subsample was injected onto a series of columns consisting of a 21 cm\ncolumn of G50 and a 19 cm column of G75 Sephadex gel. The fluorescence of the\ncolumn effluent was measured at excitation and emission wavelengths of 490 and\n530 nm, respectively. Hydrolysis rates were calculated from the change in\nmolecular weight distribution of the substrate over time, as described in\ndetail in Arnosti [2003]. |
attribute | NC_GLOBAL | awards_0_award_nid | String | 712358 |
attribute | NC_GLOBAL | awards_0_award_number | String | OCE-1332881 |
attribute | NC_GLOBAL | awards_0_data_url | String | http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=1332881 |
attribute | NC_GLOBAL | awards_0_funder_name | String | NSF Division of Ocean Sciences |
attribute | NC_GLOBAL | awards_0_funding_acronym | String | NSF OCE |
attribute | NC_GLOBAL | awards_0_funding_source_nid | String | 355 |
attribute | NC_GLOBAL | awards_0_program_manager | String | Henrietta N Edmonds |
attribute | NC_GLOBAL | awards_0_program_manager_nid | String | 51517 |
attribute | NC_GLOBAL | cdm_data_type | String | Other |
attribute | NC_GLOBAL | comment | String | Polysaccharide hydrolysis rates from large volume incubations, EN556 \n C. Arnosti (UNC) \n version: 2017-11-16 |
attribute | NC_GLOBAL | Conventions | String | COARDS, CF-1.6, ACDD-1.3 |
attribute | NC_GLOBAL | creator_email | String | info at bco-dmo.org |
attribute | NC_GLOBAL | creator_name | String | BCO-DMO |
attribute | NC_GLOBAL | creator_type | String | institution |
attribute | NC_GLOBAL | creator_url | String | https://www.bco-dmo.org/ |
attribute | NC_GLOBAL | data_source | String | extract_data_as_tsv version 2.3 19 Dec 2019 |
attribute | NC_GLOBAL | dataset_current_state | String | Final and no updates |
attribute | NC_GLOBAL | date_created | String | 2017-11-20T19:36:47Z |
attribute | NC_GLOBAL | date_modified | String | 2020-05-13T13:32:08Z |
attribute | NC_GLOBAL | defaultDataQuery | String | &time<now |
attribute | NC_GLOBAL | doi | String | 10.26008/1912/bco-dmo.719712.1 |
attribute | NC_GLOBAL | geospatial_vertical_max | double | 199.0 |
attribute | NC_GLOBAL | geospatial_vertical_min | double | 1.0 |
attribute | NC_GLOBAL | geospatial_vertical_positive | String | down |
attribute | NC_GLOBAL | geospatial_vertical_units | String | m |
attribute | NC_GLOBAL | infoUrl | String | https://www.bco-dmo.org/dataset/719712 |
attribute | NC_GLOBAL | institution | String | BCO-DMO |
attribute | NC_GLOBAL | instruments_0_acronym | String | Niskin bottle |
attribute | NC_GLOBAL | instruments_0_dataset_instrument_description | String | Used to collect water for large volume mesocosm experiments |
attribute | NC_GLOBAL | instruments_0_dataset_instrument_nid | String | 719718 |
attribute | NC_GLOBAL | instruments_0_description | String | A Niskin bottle (a next generation water sampler based on the Nansen bottle) is a cylindrical, non-metallic water collection device with stoppers at both ends. The bottles can be attached individually on a hydrowire or deployed in 12, 24, or 36 bottle Rosette systems mounted on a frame and combined with a CTD. Niskin bottles are used to collect discrete water samples for a range of measurements including pigments, nutrients, plankton, etc. |
attribute | NC_GLOBAL | instruments_0_instrument_external_identifier | String | https://vocab.nerc.ac.uk/collection/L22/current/TOOL0412/ |
attribute | NC_GLOBAL | instruments_0_instrument_name | String | Niskin bottle |
attribute | NC_GLOBAL | instruments_0_instrument_nid | String | 413 |
attribute | NC_GLOBAL | instruments_0_supplied_name | String | 30 liter Niskin bottles |
attribute | NC_GLOBAL | instruments_1_acronym | String | Fluorometer |
attribute | NC_GLOBAL | instruments_1_dataset_instrument_nid | String | 719719 |
attribute | NC_GLOBAL | instruments_1_description | String | A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. |
attribute | NC_GLOBAL | instruments_1_instrument_external_identifier | String | https://vocab.nerc.ac.uk/collection/L05/current/113/ |
attribute | NC_GLOBAL | instruments_1_instrument_name | String | Fluorometer |
attribute | NC_GLOBAL | instruments_1_instrument_nid | String | 484 |
attribute | NC_GLOBAL | instruments_2_acronym | String | GPC |
attribute | NC_GLOBAL | instruments_2_dataset_instrument_nid | String | 719742 |
attribute | NC_GLOBAL | instruments_2_description | String | Instruments that separate components in aqueous or organic solution based on molecular size generally for molecular weight determination. Gel permeation chromatography (GPC) is a type of size exclusion chromatography (SEC), that separates analytes on the basis of size. |
attribute | NC_GLOBAL | instruments_2_instrument_name | String | Gel Permeation Chromatograph |
attribute | NC_GLOBAL | instruments_2_instrument_nid | String | 669469 |
attribute | NC_GLOBAL | keywords | String | average, bco, bco-dmo, biological, cast, chemical, cruise, cruise_id, data, dataset, depth, depth_m, depth_no, dev, dmo, elapsed, erddap, management, oceanography, office, preliminary, profiler, rate, rep1, rep1_rate, rep2, rep2_rate, rep3, rep3_rate, salinity, salinity-temperature-depth, station, std, std_dev, substrate, temperature, time, time_elapsed_hr, timepoint |
attribute | NC_GLOBAL | license | String | https://www.bco-dmo.org/dataset/719712/license |
attribute | NC_GLOBAL | metadata_source | String | https://www.bco-dmo.org/api/dataset/719712 |
attribute | NC_GLOBAL | param_mapping | String | {'719712': {'depth_m': 'flag - depth'}} |
attribute | NC_GLOBAL | parameter_source | String | https://www.bco-dmo.org/mapserver/dataset/719712/parameters |
attribute | NC_GLOBAL | people_0_affiliation | String | University of North Carolina at Chapel Hill |
attribute | NC_GLOBAL | people_0_affiliation_acronym | String | UNC-Chapel Hill |
attribute | NC_GLOBAL | people_0_person_name | String | Carol Arnosti |
attribute | NC_GLOBAL | people_0_person_nid | String | 661940 |
attribute | NC_GLOBAL | people_0_role | String | Principal Investigator |
attribute | NC_GLOBAL | people_0_role_type | String | originator |
attribute | NC_GLOBAL | people_1_affiliation | String | Woods Hole Oceanographic Institution |
attribute | NC_GLOBAL | people_1_affiliation_acronym | String | WHOI BCO-DMO |
attribute | NC_GLOBAL | people_1_person_name | String | Nancy Copley |
attribute | NC_GLOBAL | people_1_person_nid | String | 50396 |
attribute | NC_GLOBAL | people_1_role | String | BCO-DMO Data Manager |
attribute | NC_GLOBAL | people_1_role_type | String | related |
attribute | NC_GLOBAL | project | String | Patterns of activities |
attribute | NC_GLOBAL | projects_0_acronym | String | Patterns of activities |
attribute | NC_GLOBAL | projects_0_description | String | NSF Award Abstract:\nHeterotrophic microbial communities are key players in the marine carbon cycle, transforming and respiring organic carbon, regenerating nutrients, and acting as the final filter in sediments through which organic matter passes before long-term burial. Microbially-driven carbon cycling in the ocean profoundly affects the global carbon cycle, but key factors determining rates and locations of organic matter remineralization are unclear. In this study, researchers from the University of North Carolina at Chapel Hill will investigate the ability of pelagic microbial communities to initiate the remineralization of polysaccharides and proteins, which together constitute a major pool of organic matter in the ocean. Results from this study will be predictive on a large scale regarding the nature of the microbial response to organic matter input, and will provide a mechanistic framework for interpreting organic matter reactivity in the ocean.\nBroader Impacts: This study will provide scientific training for undergraduate and graduate students from underrepresented groups. The project will also involve German colleagues, thus strengthening international scientific collaboration. |
attribute | NC_GLOBAL | projects_0_end_date | String | 2017-07 |
attribute | NC_GLOBAL | projects_0_geolocation | String | Atlantic Ocean, Arctic Ocean, Pacific Ocean, Greenland |
attribute | NC_GLOBAL | projects_0_name | String | Latitudinal and depth-related contrasts in enzymatic capabilities of pelagic microbial communities: Predictable patterns in the ocean? |
attribute | NC_GLOBAL | projects_0_project_nid | String | 712359 |
attribute | NC_GLOBAL | projects_0_start_date | String | 2013-08 |
attribute | NC_GLOBAL | publisher_name | String | Biological and Chemical Oceanographic Data Management Office (BCO-DMO) |
attribute | NC_GLOBAL | publisher_type | String | institution |
attribute | NC_GLOBAL | sourceUrl | String | (local files) |
attribute | NC_GLOBAL | standard_name_vocabulary | String | CF Standard Name Table v55 |
attribute | NC_GLOBAL | subsetVariables | String | cruise_id |
attribute | NC_GLOBAL | summary | String | This dataset includes polysaccharide hydrolysis rates to measure microbial enzyme activities and bacterial productivity. |
attribute | NC_GLOBAL | title | String | [EN556 bulk water polysaccharide hydrolysis rates] - Hydrolysis rates from bulk water sample incubations from R/V Endeavor cruise EN556 in 2015 (Latitudinal and depth-related contrasts in enzymatic capabilities of pelagic microbial communities: Predictable patterns in the ocean?) |
attribute | NC_GLOBAL | version | String | 1 |
attribute | NC_GLOBAL | xml_source | String | osprey2erddap.update_xml() v1.5 |
variable | cruise_id | String | ||
attribute | cruise_id | bcodmo_name | String | cruise_id |
attribute | cruise_id | description | String | cruise identifier |
attribute | cruise_id | long_name | String | Cruise Id |
attribute | cruise_id | units | String | unitless |
variable | station | byte | ||
attribute | station | _FillValue | byte | 127 |
attribute | station | actual_range | byte | 1, 4 |
attribute | station | bcodmo_name | String | station |
attribute | station | description | String | station number |
attribute | station | long_name | String | Station |
attribute | station | units | String | unitless |
variable | cast | byte | ||
attribute | cast | _FillValue | byte | 127 |
attribute | cast | actual_range | byte | 1, 4 |
attribute | cast | bcodmo_name | String | cast |
attribute | cast | description | String | cast number |
attribute | cast | long_name | String | Cast |
attribute | cast | units | String | unitless |
variable | depth_no | String | ||
attribute | depth_no | bcodmo_name | String | depth_comment |
attribute | depth_no | description | String | depth description: sequence of depths sampled with 1 is surface and higher numbers at greater depths |
attribute | depth_no | long_name | String | Depth |
attribute | depth_no | standard_name | String | depth |
attribute | depth_no | units | String | unitless |
variable | depth | double | ||
attribute | depth | _CoordinateAxisType | String | Height |
attribute | depth | _CoordinateZisPositive | String | down |
attribute | depth | _FillValue | double | NaN |
attribute | depth | actual_range | double | 1.0, 199.0 |
attribute | depth | axis | String | Z |
attribute | depth | bcodmo_name | String | depth |
attribute | depth | colorBarMaximum | double | 8000.0 |
attribute | depth | colorBarMinimum | double | -8000.0 |
attribute | depth | colorBarPalette | String | TopographyDepth |
attribute | depth | description | String | actual depth at which water collected |
attribute | depth | ioos_category | String | Location |
attribute | depth | long_name | String | Depth |
attribute | depth | nerc_identifier | String | https://vocab.nerc.ac.uk/collection/P09/current/DEPH/ |
attribute | depth | positive | String | down |
attribute | depth | standard_name | String | depth |
attribute | depth | units | String | m |
variable | substrate | String | ||
attribute | substrate | bcodmo_name | String | unknown |
attribute | substrate | description | String | substrates for measurement of enzymatic activities: a-glu = alpha glucosidase: 4-methylumbelliferyl-a-D-glucopyranoside; b-glu = beta glucosidase: 4-methylumbelliferyl-beta-D-glucopyranoside; L = leucine aminopeptidase (L-leucine-7-amido-4 MCA); AAF = chymotrypsin activity: ala-ala-phe-MCA; AAPF = chymotrypsin activity: N-succinyl-ala-ala-pro-phe-MCA; QAR = trypsin activity: Boc-gln-ala-arg-MCA; FSR = trypsin activity: N-t-boc-phe-ser-arg-MCA |
attribute | substrate | long_name | String | Substrate |
attribute | substrate | units | String | unitless |
variable | timepoint | String | ||
attribute | timepoint | bcodmo_name | String | time_point |
attribute | timepoint | description | String | sampling time point (0; 1; 2; etc.) post-incubation |
attribute | timepoint | long_name | String | Timepoint |
attribute | timepoint | units | String | unitless |
variable | time_elapsed_hr | float | ||
attribute | time_elapsed_hr | _FillValue | float | NaN |
attribute | time_elapsed_hr | actual_range | float | 0.0, 1692.37 |
attribute | time_elapsed_hr | bcodmo_name | String | time_elapsed |
attribute | time_elapsed_hr | description | String | hours elapsed to reach a specific timepoint |
attribute | time_elapsed_hr | long_name | String | Time Elapsed Hr |
attribute | time_elapsed_hr | nerc_identifier | String | https://vocab.nerc.ac.uk/collection/P01/current/ELTMZZZZ/ |
attribute | time_elapsed_hr | units | String | hours |
variable | rep1_rate | float | ||
attribute | rep1_rate | _FillValue | float | NaN |
attribute | rep1_rate | actual_range | float | 0.0, 47.3 |
attribute | rep1_rate | bcodmo_name | String | unknown |
attribute | rep1_rate | description | String | replicate 1 of enzymatic hydrolysis rate |
attribute | rep1_rate | long_name | String | Rep1 Rate |
attribute | rep1_rate | units | String | nanomol monosaccharide/liter/hour |
variable | rep2_rate | float | ||
attribute | rep2_rate | _FillValue | float | NaN |
attribute | rep2_rate | actual_range | float | 0.0, 40.3 |
attribute | rep2_rate | bcodmo_name | String | unknown |
attribute | rep2_rate | description | String | replicate 2 of enzymatic hydrolysis rate |
attribute | rep2_rate | long_name | String | Rep2 Rate |
attribute | rep2_rate | units | String | nanomol monosaccharide/liter/hour |
variable | rep3_rate | float | ||
attribute | rep3_rate | _FillValue | float | NaN |
attribute | rep3_rate | actual_range | float | 0.0, 17.13 |
attribute | rep3_rate | bcodmo_name | String | unknown |
attribute | rep3_rate | description | String | replicate 3 of enzymatic hydrolysis rate |
attribute | rep3_rate | long_name | String | Rep3 Rate |
attribute | rep3_rate | units | String | nanomol monosaccharide/liter/hour |
variable | average | float | ||
attribute | average | _FillValue | float | NaN |
attribute | average | actual_range | float | 0.0, 29.4 |
attribute | average | bcodmo_name | String | unknown |
attribute | average | description | String | average of the 3 hydrolysis rates |
attribute | average | long_name | String | Average |
attribute | average | units | String | nanomol monosaccharide/liter/hour |
variable | std_dev | float | ||
attribute | std_dev | _FillValue | float | NaN |
attribute | std_dev | actual_range | float | 0.0, 25.19 |
attribute | std_dev | bcodmo_name | String | unknown |
attribute | std_dev | description | String | standard deviation of the 3 hydrolysis rates |
attribute | std_dev | long_name | String | Std Dev |
attribute | std_dev | units | String | nanomol monosaccharide/liter/hour |