http://lod.bco-dmo.org/id/dataset/734324
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2018-04-24
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Trace-metals from CTD casts and underway water samples collected during the R/V Hugh R. Sharp cruise HRS1414 in the Mid and South-Atlantic Bight in August of 2014 (DANCE project)
2018-04-25
publication
2018-04-25
revision
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2019-08-15
publication
https://doi.org/10.1575/1912/bco-dmo.734324.1
Peter N. Sedwick
Old Dominion University
principalInvestigator
Margaret Mulholland
Old Dominion University
principalInvestigator
Raymond Najjar
Pennsylvania State University
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
Cite this dataset as: Sedwick, P., Mulholland, M., Najjar, R. (2018) Trace-metals from CTD casts and underway water samples collected during the R/V Hugh R. Sharp cruise HRS1414 in the Mid and South-Atlantic Bight in August of 2014 (DANCE project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2018-04-25 [if applicable, indicate subset used]. doi:10.1575/1912/bco-dmo.734324.1 [access date]
Methods and Sampling: [The following methodology applies where dataset parameter "sample_source" is "UNDERWAY"]
Near-surface sample collection: Near-surface (~4 m depth) seawater was collected whilst underway at ~5 knots using a trace-metal clean towfish system [Sedwick et al., 2011]. The subsamples for analysis of DFe, NO3+NO2, PO4 were taken directly from the towfish line, after filtration through a 0.8/0.2 µm AcroPak Supor filter capsule (Pall), in acid-cleaned 125 mL low-density polyethylene bottles (Nalgene) for shore-based DFe determinations, and 60 mL polypropylene tubes (Falcon) for shipboard NO3+NO2, PO4 and NH4 analyses.
Near-surface underway measurements: Continuous underway measurements of near-surface seawater temperature, salinity and chlorophyll fluorescence were made using the ship's underway seawater supply, which is pumed from a water depth of ~1m. The data presented correspond to the approximate times when subsamples were collected from the towfish seawater outlet for measurements of dissolved iron and macronutrients (see above).
DFe: Filtered seawater samples were acidified at-sea to pH ~1.8 with Fisher Optima grade ultrapure hydrochloric acid, and then stored at room temperature until post-cruise analysis at Old Dominion University. Dissolved iron was determined by flow injection analysis with colorimetric detection after in-line preconcentration on resin-immobilized 8-hydroxyquinoline (Sedwick et al., 2015), using a method modified from Measures et al. (1995). Analyses were performed on a volumetric basis, so concentrations are reported in units of nanomole liter-1 (nM). Analytical precision is estimated from multiple (separate-day) determinations of the SAFe seawater reference materials, which yield uncertainties (expressed as one relative standard deviation on the mean, or one sigma) of ~15% at the concentration level of SAFe S seawater (0.090 nM), and ~10% at the concentration level of SAFe D2 seawater (0.90 nM). The analytical limit of detection is estimated as the DFe concentration equivalent to a peak area that is three times the standard deviation on the zero-loading blank (manifold blank), which yields an estimated detection limit below 0.04 nM (Bowie et al., 2004). Blank contributions from the ammonium acetate sample buffer solution (added on-line during analysis) and hydrochloric acid (added after collection) are negligible.
NO3+NO2: Dissolved nitrate and nitrite was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.14 µM (Parsons et al., 1984; Price and Harrison, 1987). In surface waters, nitrate and nitrite were determined using the same autoanalyzer equipped with a liquid waveguide capillary cell (World Precision Instruments) (Zhang, 2000) to achieve an estimated detection limit of 0.02 µM.
PO4: Dissolved phosphate was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.03 µM (Parsons et al., 1984; Price and Harrison, 1987).
NH4: Dissolved ammonium was determined at sea using the manual orthophthaldialdehyde method (Holmes et al., 1999), with an estimated detection limit of 10 nM.
Temperature: Underway temperature was measured using a conductivity-temperature-depth sensor (SBE 45, SeaBird Electronics).
Salinity: Underway salinity was calculated from in-situ conductivity, as measured using a conductivity-temperature-depth (CTD) sensor (SBE 45, SeaBird Electronics).
Fluorescence: Underway chlorophyll fluorescence was measured using a Turner AU10 fluorometer.
[The following methodology applies where dataset parameter "sample_source" is "CTD"]
Water column sample collection and in-situ measurements: Water-column samples for analysis of dissolved iron, nitrate plus nitrite, phosphate and ammonium, and continuous profiles of temperature, salinity and chlorophyll fluorescence were collected using a trace-metal clean conductivity-temperature-depth sensor (SBE 19 plus, SeaBird Electronics) mounted on a custom-built trace-metal clean carousel (SeaBird Electronics) fitted with custom-modified 5-L Teflon-lined external-closure Niskin-X samplers (General Oceanics), deployed on a Kevlar line. Upon recovery, the Niskin-X samplers were transferred into a shipboard Class-100 clean laboratory, where seawater was filtered through pre-cleaned 0.2-µm pore AcroPak Supor filter capsules (Pall) into acid-cleaned 125 mL low-density polyethylene bottles (Nalgene) for shore-based dissolved iron determinations, and 60 mL polypropylene tubes (Falcon) for shipboard nutrient analyses.
DFe: Filtered seawater samples were acidified at-sea to pH ~1.8 with Fisher Optima grade ultrapure hydrochloric acid, and then stored at room temperature until post-cruise analysis at Old Dominion University. Dissolved iron was determined by flow injection analysis with colorimetric detection after in-line preconcentration on resin-immobilized 8-hydroxyquinoline (Sedwick et al., 2015), using a method modified from Measures et al. (1995). Analyses were performed on a volumetric basis, so concentrations are reported in units of nanomole liter-1 (nM). Analytical precision is estimated from multiple (separate-day) determinations of the SAFe seawater reference materials, which yield uncertainties (expressed as one relative standard deviation on the mean, or one sigma) of ~15% at the concentration level of SAFe S seawater (0.090 nM), and ~10% at the concentration level of SAFe D2 seawater (0.90 nM). The analytical limit of detection is estimated as the DFe concentration equivalent to a peak area that is three times the standard deviation on the zero-loading blank (manifold blank), which yields an estimated detection limit below 0.04 nM (Bowie et al., 2004). Blank contributions from the ammonium acetate sample buffer solution (added on-line during analysis) and hydrochloric acid (added after collection) are negligible.
NO3+NO2: Dissolved nitrate and nitrite was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.14 µM (Parsons et al., 1984; Price and Harrison, 1987). In surface waters, nitrate and nitrite were determined using the same autoanalyzer equipped with a liquid waveguide capillary cell (World Precision Instruments) (Zhang, 2000) to achieve an estimated detection limit of 0.02 µM.
PO4: Dissolved phosphate was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.03 µM (Parsons et al., 1984; Price and Harrison, 1987).
NH4: Dissolved ammonium was determined at sea using the manual orthophthaldialdehyde method (Holmes et al., 1999), with an estimated detection limit of 10 nM.
Temperature: In-situ temperature was measured using a conductivity-temperature-depth sensor (SBE 19 plus, SeaBird Electronics).
Salinity: Salinity was calculated from in-situ conductivity, as measured using a conductivity-temperature-depth (CTD) sensor (SBE 19 plus, SeaBird Electronics).
Fluorescence: In-situ chlorophyll fluorescence was measured using a WET Labs ECO-FL(RT)D deep chlorophyll fluorometer with 125 μg L-1 range mounted on the CTD rosette.
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1260574 Award URL: http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=1260574
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1260454 Award URL: http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=1260454
completed
Peter N. Sedwick
Old Dominion University
757-683-4936
Ocean, Earth & Atmospheric Sciences 4600 Elkhorn Ave.
Norfolk
VA
23529
USA
psedwick@odu.edu
pointOfContact
Margaret Mulholland
Old Dominion University
757-739-0449
Department of Ocean, Earth, and Atmospheric Sciences 4600 Elkhorn Ave.
Norfolk
VA
23529-0276
USA
mmulholl@odu.edu
pointOfContact
Raymond Najjar
Pennsylvania State University
814-863-1586
Department of Meteorology and Atmospheric Science 503 Walker Building
University Park
PA
16802
USA
rgn1@psu.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
sample_source
Sample_ID
Station
Depth
Date
Time
Latitude
Longitude
Dfe
DFe_flag
NO3_NO2
PO4
NH4
Temp
Salinity
Fluor
SBE 45, SeaBird Electronics
SBE 19 plus
Turner AU10 fluorometer
: WET Labs ECO-FL(RT)D deep chlorophyll fluorometer
Shimadzu RF1501 (Spectrofluorophotometer)
Astoria Pacific nutrient autoanalyzer
Shimadzu SPD-10AV
theme
None, User defined
sample description
sample identification
station
depth
date
time of day
latitude
longitude
Iron
quality flag
nitrate plus nitrite
reactive phosphorus (PO4)
Ammonium
water temperature
salinity
fluorescence
featureType
BCO-DMO Standard Parameters
CTD Sea-Bird
CTD Sea-Bird
Fluorometer
Fluorometer
Fluorometer
Nutrient Autoanalyzer
UV Spectrophotometer-Shimadzu
instrument
BCO-DMO Standard Instruments
HRS1414
service
Deployment Activity
Offshore Mid-Atlantic Bight and northern South-Atlantic Bight
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Collaborative Research: Impacts of atmospheric nitrogen deposition on the biogeochemistry of oligotrophic coastal waters
https://www.bco-dmo.org/project/726328
Collaborative Research: Impacts of atmospheric nitrogen deposition on the biogeochemistry of oligotrophic coastal waters
<p>NSF abstract:</p>
<p>Deposition of atmospheric nitrogen provides reactive nitrogen species that influence primary production in nitrogen-limited regions. Although it is generally assumed that these species in precipitation contributes substantially to anthropogenic nitrogen loadings in many coastal marine systems, its biological impact remains poorly understood. Scientists from Pennsylvania State University, William & Mary College, and Old Dominion University will carry out a process-oriented field and modeling effort to test the hypothesis that deposits of wet atmospheric nitrogen (i.e., precipitation) stimulate primary productivity and accumulation of algal biomass in coastal waters following summer storms and this effect exceeds the associated biogeochemical responses to wind-induced mixing and increased stratification caused by surface freshening in oligotrophic coastal waters of the eastern United States. To attain their goal, the researchers would perform a Lagrangian field experiment during the summer months in coastal waters located between Delaware Bay and the coastal Carolinas to determine the response of surface-layer biogeochemistry and biology to precipitation events, which will be identified and intercepted using radar and satellite data. As regards the modeling effort, a 1-D upper ocean mixing model and a 1-D biogeochemical upper-ocean will be calibrated by assimilating the field data obtained a part of the study using the adjoint method. The hypothesis will be tested using sensitivity studies with the calibrated model combined with in-situ data and results from the incubation experiments. Lastly, to provide regional and historical context for the field measurements and the associated 1-D modeling, linked regional atmospheric-oceanic biogeochemical modeling will be conducted.</p>
<p>Broader Impacts. Results from the study would be incorporated into class lectures for graduate courses on marine policy and marine biogeochemistry. One graduate student from Pennsylvania State University, one graduate student from the College of William and Mary, and one graduate and one undergraduate student from Old Dominion University would be supported and trained as part of this project.</p>
DANCE
largerWorkCitation
project
eng; USA
oceans
Offshore Mid-Atlantic Bight and northern South-Atlantic Bight
-74.4656
-71.1548
33.628
38.6456
2014-08-01
2014-08-10
Offshore Mid-Atlantic Bight and northern South-Atlantic Bight between latitudes 31.60°N and 38.89°N, and longitudes 71.09°W and 75.16°W
0
BCO-DMO catalogue of parameters from Trace-metals from CTD casts and underway water samples collected during the R/V Hugh R. Sharp cruise HRS1414 in the Mid and South-Atlantic Bight in August of 2014 (DANCE project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/734381.rdf
Name: sample_source
Units: unitless
Description: Source of sample water (CTD or UNDERWAY). UNDERWAY samples were collected by a trace-metal clean towfish system (Sedwick et al., 2011)
http://lod.bco-dmo.org/id/dataset-parameter/734382.rdf
Name: Sample_ID
Units: unitless
Description: Unique identifier for each water sample
http://lod.bco-dmo.org/id/dataset-parameter/734383.rdf
Name: Station
Units: unitless
Description: DANCE cruise station number
http://lod.bco-dmo.org/id/dataset-parameter/734384.rdf
Name: Depth
Units: meters (m)
Description: Sample collection depth (below surface)
http://lod.bco-dmo.org/id/dataset-parameter/734385.rdf
Name: Date
Units: unitless
Description: Local date (EST) of collection in format yyyy-mm-dd
http://lod.bco-dmo.org/id/dataset-parameter/734386.rdf
Name: Time
Units: unitless
Description: Local time (EST) of collection of sample/data in format HH:MM
http://lod.bco-dmo.org/id/dataset-parameter/734387.rdf
Name: Latitude
Units: decimal degrees
Description: Latitude of water sample, if source is CTD then this latitude is the start of the CTD cast
http://lod.bco-dmo.org/id/dataset-parameter/734388.rdf
Name: Longitude
Units: decimal degrees
Description: Longitude of water sample, if source is CTD then this longitude is the start of the CTD cast
http://lod.bco-dmo.org/id/dataset-parameter/734389.rdf
Name: Dfe
Units: nanomoles per liter (nmol/L)
Description: Dissolved iron concentration
http://lod.bco-dmo.org/id/dataset-parameter/734390.rdf
Name: DFe_flag
Units: unitless
Description: Dissolved iron data quality flag. 2 (good), 3 (contamination suspected)
http://lod.bco-dmo.org/id/dataset-parameter/734391.rdf
Name: NO3_NO2
Units: micromoles per liter (umol/L)
Description: Dissolved nitrate plus nitrite concentration
http://lod.bco-dmo.org/id/dataset-parameter/734392.rdf
Name: PO4
Units: micromoles per liter (umol/L)
Description: Dissolved phosphate concentration
http://lod.bco-dmo.org/id/dataset-parameter/734393.rdf
Name: NH4
Units: nanomoles per liter (nmol/L)
Description: Dissolved ammonium concentration
http://lod.bco-dmo.org/id/dataset-parameter/734394.rdf
Name: Temp
Units: degrees Celsius (°C)
Description: Temperature
http://lod.bco-dmo.org/id/dataset-parameter/734395.rdf
Name: Salinity
Units: Practical salinity units (PSU)
Description: Salinity
http://lod.bco-dmo.org/id/dataset-parameter/734396.rdf
Name: Fluor
Units: volt
Description: Chlorophyll fluorescence
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
10920
https://darchive.mblwhoilibrary.org/bitstream/1912/24447/1/dataset-734324_trace-metals-ctd-casts-and-underway-water-samples__v1.tsv
download
https://doi.org/10.1575/1912/bco-dmo.734324.1
download
onLine
dataset
[The following methodology applies where dataset parameter "sample_source" is "UNDERWAY"]
Near-surface sample collection: Near-surface (~4 m depth) seawater was collected whilst underway at ~5 knots using a trace-metal clean towfish system [Sedwick et al., 2011]. The subsamples for analysis of DFe, NO3+NO2, PO4 were taken directly from the towfish line, after filtration through a 0.8/0.2 µm AcroPak Supor filter capsule (Pall), in acid-cleaned 125 mL low-density polyethylene bottles (Nalgene) for shore-based DFe determinations, and 60 mL polypropylene tubes (Falcon) for shipboard NO3+NO2, PO4 and NH4 analyses.
Near-surface underway measurements: Continuous underway measurements of near-surface seawater temperature, salinity and chlorophyll fluorescence were made using the ship's underway seawater supply, which is pumed from a water depth of ~1m. The data presented correspond to the approximate times when subsamples were collected from the towfish seawater outlet for measurements of dissolved iron and macronutrients (see above).
DFe: Filtered seawater samples were acidified at-sea to pH ~1.8 with Fisher Optima grade ultrapure hydrochloric acid, and then stored at room temperature until post-cruise analysis at Old Dominion University. Dissolved iron was determined by flow injection analysis with colorimetric detection after in-line preconcentration on resin-immobilized 8-hydroxyquinoline (Sedwick et al., 2015), using a method modified from Measures et al. (1995). Analyses were performed on a volumetric basis, so concentrations are reported in units of nanomole liter-1 (nM). Analytical precision is estimated from multiple (separate-day) determinations of the SAFe seawater reference materials, which yield uncertainties (expressed as one relative standard deviation on the mean, or one sigma) of ~15% at the concentration level of SAFe S seawater (0.090 nM), and ~10% at the concentration level of SAFe D2 seawater (0.90 nM). The analytical limit of detection is estimated as the DFe concentration equivalent to a peak area that is three times the standard deviation on the zero-loading blank (manifold blank), which yields an estimated detection limit below 0.04 nM (Bowie et al., 2004). Blank contributions from the ammonium acetate sample buffer solution (added on-line during analysis) and hydrochloric acid (added after collection) are negligible.
NO3+NO2: Dissolved nitrate and nitrite was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.14 µM (Parsons et al., 1984; Price and Harrison, 1987). In surface waters, nitrate and nitrite were determined using the same autoanalyzer equipped with a liquid waveguide capillary cell (World Precision Instruments) (Zhang, 2000) to achieve an estimated detection limit of 0.02 µM.
PO4: Dissolved phosphate was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.03 µM (Parsons et al., 1984; Price and Harrison, 1987).
NH4: Dissolved ammonium was determined at sea using the manual orthophthaldialdehyde method (Holmes et al., 1999), with an estimated detection limit of 10 nM.
Temperature: Underway temperature was measured using a conductivity-temperature-depth sensor (SBE 45, SeaBird Electronics).
Salinity: Underway salinity was calculated from in-situ conductivity, as measured using a conductivity-temperature-depth (CTD) sensor (SBE 45, SeaBird Electronics).
Fluorescence: Underway chlorophyll fluorescence was measured using a Turner AU10 fluorometer.
[The following methodology applies where dataset parameter "sample_source" is "CTD"]
Water column sample collection and in-situ measurements: Water-column samples for analysis of dissolved iron, nitrate plus nitrite, phosphate and ammonium, and continuous profiles of temperature, salinity and chlorophyll fluorescence were collected using a trace-metal clean conductivity-temperature-depth sensor (SBE 19 plus, SeaBird Electronics) mounted on a custom-built trace-metal clean carousel (SeaBird Electronics) fitted with custom-modified 5-L Teflon-lined external-closure Niskin-X samplers (General Oceanics), deployed on a Kevlar line. Upon recovery, the Niskin-X samplers were transferred into a shipboard Class-100 clean laboratory, where seawater was filtered through pre-cleaned 0.2-µm pore AcroPak Supor filter capsules (Pall) into acid-cleaned 125 mL low-density polyethylene bottles (Nalgene) for shore-based dissolved iron determinations, and 60 mL polypropylene tubes (Falcon) for shipboard nutrient analyses.
DFe: Filtered seawater samples were acidified at-sea to pH ~1.8 with Fisher Optima grade ultrapure hydrochloric acid, and then stored at room temperature until post-cruise analysis at Old Dominion University. Dissolved iron was determined by flow injection analysis with colorimetric detection after in-line preconcentration on resin-immobilized 8-hydroxyquinoline (Sedwick et al., 2015), using a method modified from Measures et al. (1995). Analyses were performed on a volumetric basis, so concentrations are reported in units of nanomole liter-1 (nM). Analytical precision is estimated from multiple (separate-day) determinations of the SAFe seawater reference materials, which yield uncertainties (expressed as one relative standard deviation on the mean, or one sigma) of ~15% at the concentration level of SAFe S seawater (0.090 nM), and ~10% at the concentration level of SAFe D2 seawater (0.90 nM). The analytical limit of detection is estimated as the DFe concentration equivalent to a peak area that is three times the standard deviation on the zero-loading blank (manifold blank), which yields an estimated detection limit below 0.04 nM (Bowie et al., 2004). Blank contributions from the ammonium acetate sample buffer solution (added on-line during analysis) and hydrochloric acid (added after collection) are negligible.
NO3+NO2: Dissolved nitrate and nitrite was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.14 µM (Parsons et al., 1984; Price and Harrison, 1987). In surface waters, nitrate and nitrite were determined using the same autoanalyzer equipped with a liquid waveguide capillary cell (World Precision Instruments) (Zhang, 2000) to achieve an estimated detection limit of 0.02 µM.
PO4: Dissolved phosphate was determined at sea using an Astoria Pacific nutrient autoanalyzer using standard colorimetric methods with an estimated detection limit of 0.03 µM (Parsons et al., 1984; Price and Harrison, 1987).
NH4: Dissolved ammonium was determined at sea using the manual orthophthaldialdehyde method (Holmes et al., 1999), with an estimated detection limit of 10 nM.
Temperature: In-situ temperature was measured using a conductivity-temperature-depth sensor (SBE 19 plus, SeaBird Electronics).
Salinity: Salinity was calculated from in-situ conductivity, as measured using a conductivity-temperature-depth (CTD) sensor (SBE 19 plus, SeaBird Electronics).
Fluorescence: In-situ chlorophyll fluorescence was measured using a WET Labs ECO-FL(RT)D deep chlorophyll fluorometer with 125 μg L-1 range mounted on the CTD rosette.
Specified by the Principal Investigator(s)
<p>CTD data (temperature, salinity) were processed using SeaSoft processing software (SeaBird Electronics).</p>
<p>BCO-DMO Data Manager Processing Notes:<br />
* added a conventional header with dataset name, PI name, version date<br />
* modified parameter names to conform with BCO-DMO naming conventions<br />
* combined two Excel files, one for the underway data and one for the ctd data into one dataset.<br />
* missing data shown as default missing data identifier "nd" for "no data" or "BDL" for below detection limit.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
SBE 45, SeaBird Electronics
SBE 45, SeaBird Electronics
PI Supplied Instrument Name: SBE 45, SeaBird Electronics PI Supplied Instrument Description:SBE 45, SeaBird Electronics: CTD sensor (temperature and conductivity) Instrument Name: CTD Sea-Bird Instrument Short Name:CTD Sea-Bird Instrument Description: Conductivity, Temperature, Depth (CTD) sensor package from SeaBird Electronics, no specific unit identified. This instrument designation is used when specific make and model are not known. See also other SeaBird instruments listed under CTD. More information from Sea-Bird Electronics. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/130/
SBE 19 plus
SBE 19 plus
PI Supplied Instrument Name: SBE 19 plus PI Supplied Instrument Description:SBE 19 plus, SeaBird Electronics, calibrated by calibrated by SeaBird Electronics: CTD sensor (temperature and conductivity) Instrument Name: CTD Sea-Bird Instrument Short Name:CTD Sea-Bird Instrument Description: Conductivity, Temperature, Depth (CTD) sensor package from SeaBird Electronics, no specific unit identified. This instrument designation is used when specific make and model are not known. See also other SeaBird instruments listed under CTD. More information from Sea-Bird Electronics. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/130/
Turner AU10 fluorometer
Turner AU10 fluorometer
PI Supplied Instrument Name: Turner AU10 fluorometer PI Supplied Instrument Description:Fluorometer: in-situ chlorophyll fluorescence Instrument Name: Fluorometer Instrument Short Name:Fluorometer Instrument Description: A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
: WET Labs ECO-FL(RT)D deep chlorophyll fluorometer
: WET Labs ECO-FL(RT)D deep chlorophyll fluorometer
PI Supplied Instrument Name: : WET Labs ECO-FL(RT)D deep chlorophyll fluorometer PI Supplied Instrument Description:WET Labs ECO-FL(RT)D deep chlorophyll fluorometer, calibrated by SeaBird Electronics: in-situ chlorophyll fluorescence Instrument Name: Fluorometer Instrument Short Name:Fluorometer Instrument Description: A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
Shimadzu RF1501 (Spectrofluorophotometer)
Shimadzu RF1501 (Spectrofluorophotometer)
PI Supplied Instrument Name: Shimadzu RF1501 (Spectrofluorophotometer) PI Supplied Instrument Description:Spectrofluorophotometer: NH4 Instrument Name: Fluorometer Instrument Short Name:Fluorometer Instrument Description: A fluorometer or fluorimeter is a device used to measure parameters of fluorescence: its intensity and wavelength distribution of emission spectrum after excitation by a certain spectrum of light. The instrument is designed to measure the amount of stimulated electromagnetic radiation produced by pulses of electromagnetic radiation emitted into a water sample or in situ. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/113/
Astoria Pacific nutrient autoanalyzer
Astoria Pacific nutrient autoanalyzer
PI Supplied Instrument Name: Astoria Pacific nutrient autoanalyzer PI Supplied Instrument Description:Macronutrient analysis: NO3+NO2, PO4 Instrument Name: Nutrient Autoanalyzer Instrument Short Name:Nutrient Autoanalyzer Instrument Description: Nutrient Autoanalyzer is a generic term used when specific type, make and model were not specified. In general, a Nutrient Autoanalyzer is an automated flow-thru system for doing nutrient analysis (nitrate, ammonium, orthophosphate, and silicate) on seawater samples. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB04/
Shimadzu SPD-10AV
Shimadzu SPD-10AV
PI Supplied Instrument Name: Shimadzu SPD-10AV PI Supplied Instrument Description:UV-visible spectrophotometric detector: DFe Instrument Name: UV Spectrophotometer-Shimadzu Instrument Short Name:UV Spectrophotometer-Shimadzu Instrument Description: The Shimadzu UV Spectrophotometer is manufactured by Shimadzu Scientific Instruments (ssi.shimadzu.com). Shimadzu manufacturers several models of spectrophotometer; refer to dataset for make/model information. Community Standard Description: http://vocab.nerc.ac.uk/collection/L05/current/LAB20/
Cruise: HRS1414
HRS1414
R/V Hugh R. Sharp
Community Standard Description
International Council for the Exploration of the Sea
R/V Hugh R. Sharp
vessel
HRS1414
Raymond Najjar
Pennsylvania State University
R/V Hugh R. Sharp
Community Standard Description
International Council for the Exploration of the Sea
R/V Hugh R. Sharp
vessel