bcodmo_dataset_925359_v1 eng UTF8 dataset service Adam Shepherd BCO-DMO 508-289-2772 266 Woods Hole Rd. MS#36 Woods Hole MA 02543 USA erddap@bco-dmo.org pointOfContact 2026-04-16 ISO 19115-2 Geographic Information - Metadata Part 2 Extensions for Imagery and Gridded Data ISO 19115-2:2009(E) 2 column row [Aerosol REE and Th-232 data from northern Gulf of Alaska region] - Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) from the northern Gulf of Alaska region (Inferring trace element inputs to North Pacific surface waters from Alaskan and Asian dust) 2026-04-16 creation erddap.bco-dmo.org bcodmo_dataset_925359_v1 BCO-DMO info@bco-dmo.org https://www.bco-dmo.org/dataset/925359 information web browser Background Information Background information from the source information originator Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) are presented for filtered air (dust) samples collected from the northern Gulf of Alaska region, including from Middleton Island (AK)(59.4214 N, 146.3493 W) and the Copper River delta (60.4324 N, 145.0954 W). Size-fractionated samples were collected in November 2019, using a Tisch Volumetric Flow Controlled (VFC) high volume sampler (Tisch Environmental, TE-5170V- BL) outfitted with a Cascade impactor. The six size fractions collected ranged from <0.49 micrometers (um) to >7.2 um in diameter. This sampler technology is discussed in greater detail in Morton et al, 2013. Samples were filtered with acid-washed Whatman 41 (W41) cellulose fiber filters. Additional bulk dust samples were collected in October 2012, using a Thermo Partisol Plus 2025 using Teflon filters. Samples were fully digested using concentrated nitric and hydrofluoric acids, following the approach of Morton et al, 2013. Samples were analyzed using a Thermofisher iCAP inductively coupled plasma mass spectrometer (ICP-MS) in KED mode, with He as a collision cell gas, adapted from the approach of Trommetter et al (2020). Concentrations were determined from standard curves using a REE ICP-MS standard from High-Purity Standards (that also contained 232Th). Three internal standards (Ge, In, and Bi) were added to both samples and standards, to correct for short-term variability in the instrument response and to evaluate stability of mass response during the ICP-MS run. Concentration estimates for the REE and 232Th were blank-corrected using full-process blanks that included filters deployed during times when there was no known dust deposition. Most of the full-process blank concentrations were 100 times or more smaller than the concentrations of our lowest standard (with the exception of Ce, the concentration of which was ~seven times smaller than our lowest standard. This means that our blank concentrations were very low but also not quantified extremely accurately. Our best estimates are that the full-process blanks, including filters, ranged from 0.02 picograms per square centimeter (pg cm-2) for Eu, Tb, and Ho, to 2 pg cm-2 for Ce. These blank concentrations were in all cases 40 times or more smaller than our lowest REE sample concentration for the <0.49 um size fraction with the smallest amount of dust, and ~3 orders of magnitude smaller than the signal of the largest samples. The REE data are also presented in a double-normalized format that first normalizes to concentrations of Post Archean Australian Shale and then normalizes to the mean REE concentration. The normalization approach is slightly modified from that of Serno et al, 2014. BCO-DMO info@bco-dmo.org https://www.bco-dmo.org/dataset/925359 information web browser Background Information Background information from the source information pointOfContact earth science atmosphere ocean biosphere biology environment theme BCO-DMO project latitude longitude theme CF The data may be used and redistributed for free but is not intended for legal use, since it may contain inaccuracies. Neither the data Contributor, ERD, NOAA, nor the United States Government, nor any of their employees or contractors, makes any warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, or assumes any legal liability for the accuracy, completeness, or usefulness, of this information. BCO-DMO largerWorkCitation project eng geoscientificInformation 1 -146.3493 -145.0954 59.42144 60.4324 [Aerosol REE and Th-232 data from northern Gulf of Alaska region] - Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) from the northern Gulf of Alaska region (Inferring trace element inputs to North Pacific surface waters from Alaskan and Asian dust) 2026-04-16 creation BCO-DMO info@bco-dmo.org https://www.bco-dmo.org/dataset/925359 information web browser Background Information Background information from the source information originator Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) are presented for filtered air (dust) samples collected from the northern Gulf of Alaska region, including from Middleton Island (AK)(59.4214 N, 146.3493 W) and the Copper River delta (60.4324 N, 145.0954 W). Size-fractionated samples were collected in November 2019, using a Tisch Volumetric Flow Controlled (VFC) high volume sampler (Tisch Environmental, TE-5170V- BL) outfitted with a Cascade impactor. The six size fractions collected ranged from <0.49 micrometers (um) to >7.2 um in diameter. This sampler technology is discussed in greater detail in Morton et al, 2013. Samples were filtered with acid-washed Whatman 41 (W41) cellulose fiber filters. Additional bulk dust samples were collected in October 2012, using a Thermo Partisol Plus 2025 using Teflon filters. Samples were fully digested using concentrated nitric and hydrofluoric acids, following the approach of Morton et al, 2013. Samples were analyzed using a Thermofisher iCAP inductively coupled plasma mass spectrometer (ICP-MS) in KED mode, with He as a collision cell gas, adapted from the approach of Trommetter et al (2020). Concentrations were determined from standard curves using a REE ICP-MS standard from High-Purity Standards (that also contained 232Th). Three internal standards (Ge, In, and Bi) were added to both samples and standards, to correct for short-term variability in the instrument response and to evaluate stability of mass response during the ICP-MS run. Concentration estimates for the REE and 232Th were blank-corrected using full-process blanks that included filters deployed during times when there was no known dust deposition. Most of the full-process blank concentrations were 100 times or more smaller than the concentrations of our lowest standard (with the exception of Ce, the concentration of which was ~seven times smaller than our lowest standard. This means that our blank concentrations were very low but also not quantified extremely accurately. Our best estimates are that the full-process blanks, including filters, ranged from 0.02 picograms per square centimeter (pg cm-2) for Eu, Tb, and Ho, to 2 pg cm-2 for Ce. These blank concentrations were in all cases 40 times or more smaller than our lowest REE sample concentration for the <0.49 um size fraction with the smallest amount of dust, and ~3 orders of magnitude smaller than the signal of the largest samples. The REE data are also presented in a double-normalized format that first normalizes to concentrations of Post Archean Australian Shale and then normalizes to the mean REE concentration. The normalization approach is slightly modified from that of Serno et al, 2014. ERDDAP tabledap 1 -146.3493 -145.0954 59.42144 60.4324 tight ERDDAPtabledapDatasetQueryAndAccess https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_925359_v1 ERDDAP:tabledap ERDDAP-tabledap ERDDAP's tabledap service (a flavor of OPeNDAP) for tabular (sequence) data. Add different extensions (e.g., .html, .graph, .das, .dds) to the base URL for different purposes. download [Aerosol REE and Th-232 data from northern Gulf of Alaska region] - Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) from the northern Gulf of Alaska region (Inferring trace element inputs to North Pacific surface waters from Alaskan and Asian dust) 2026-04-16 creation BCO-DMO info@bco-dmo.org https://www.bco-dmo.org/dataset/925359 information web browser Background Information Background information from the source information originator Concentrations of the rare earth elements (REE) and Thorium-232 (232Th) are presented for filtered air (dust) samples collected from the northern Gulf of Alaska region, including from Middleton Island (AK)(59.4214 N, 146.3493 W) and the Copper River delta (60.4324 N, 145.0954 W). Size-fractionated samples were collected in November 2019, using a Tisch Volumetric Flow Controlled (VFC) high volume sampler (Tisch Environmental, TE-5170V- BL) outfitted with a Cascade impactor. The six size fractions collected ranged from <0.49 micrometers (um) to >7.2 um in diameter. This sampler technology is discussed in greater detail in Morton et al, 2013. Samples were filtered with acid-washed Whatman 41 (W41) cellulose fiber filters. Additional bulk dust samples were collected in October 2012, using a Thermo Partisol Plus 2025 using Teflon filters. Samples were fully digested using concentrated nitric and hydrofluoric acids, following the approach of Morton et al, 2013. Samples were analyzed using a Thermofisher iCAP inductively coupled plasma mass spectrometer (ICP-MS) in KED mode, with He as a collision cell gas, adapted from the approach of Trommetter et al (2020). Concentrations were determined from standard curves using a REE ICP-MS standard from High-Purity Standards (that also contained 232Th). Three internal standards (Ge, In, and Bi) were added to both samples and standards, to correct for short-term variability in the instrument response and to evaluate stability of mass response during the ICP-MS run. Concentration estimates for the REE and 232Th were blank-corrected using full-process blanks that included filters deployed during times when there was no known dust deposition. Most of the full-process blank concentrations were 100 times or more smaller than the concentrations of our lowest standard (with the exception of Ce, the concentration of which was ~seven times smaller than our lowest standard. This means that our blank concentrations were very low but also not quantified extremely accurately. Our best estimates are that the full-process blanks, including filters, ranged from 0.02 picograms per square centimeter (pg cm-2) for Eu, Tb, and Ho, to 2 pg cm-2 for Ce. These blank concentrations were in all cases 40 times or more smaller than our lowest REE sample concentration for the <0.49 um size fraction with the smallest amount of dust, and ~3 orders of magnitude smaller than the signal of the largest samples. The REE data are also presented in a double-normalized format that first normalizes to concentrations of Post Archean Australian Shale and then normalizes to the mean REE concentration. The normalization approach is slightly modified from that of Serno et al, 2014. OPeNDAP 1 -146.3493 -145.0954 59.42144 60.4324 tight OPeNDAPDatasetQueryAndAccess https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_925359_v1 OPeNDAP:OPeNDAP OPeNDAP An OPeNDAP service for tabular (sequence) data. Add different extensions (e.g., .html, .das, .dds) to the base URL for different purposes. download physicalMeasurement sample_description String Sample_description location_description String Location_description ISO_Date_UTC String Iso_date_utc La float La Ce float Ce Pr float Pr Nd float Nd Sm float Sm Eu float Eu Gd float Gd Tb float Tb Dy float Dy Ho float Ho Er float Er Tm float Tm Yb float Yb Lu float Lu Th232 float Th232 NOTES String Notes Adam Shepherd BCO-DMO 508-289-2772 266 Woods Hole Rd. MS#36 Woods Hole MA 02543 USA erddap@bco-dmo.org distributor OPeNDAP DAP/2.0 https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_925359_v1.html order Data Subset Form ERDDAP's version of the OPeNDAP .html web page for this dataset. Specify a subset of the dataset and download the data via OPeNDAP or in many different file types. download https://erddap.bco-dmo.org/erddap/tabledap/bcodmo_dataset_925359_v1.graph order Make-A-Graph Form ERDDAP's Make-A-Graph .html web page for this dataset. Create an image with a map or graph of a subset of the data. mapDigital This record was created from dataset metadata by ERDDAP Version 2.22